Coolant is depleted of buffering ingredients and
becomes extremely corrosive, literally eating holes in cooling system
components. By-products of corrosion damage, as well as rust and
scale, clog the passageways that conduct the water through the
radiator and choke off the flow. This may result in an overheated
engine that may be damaged beyond repair.
entire cooling system is first cleaned and then all debris and worn
out coolant is completely removed from the system. Then, fresh new
premium coolant is added. Conditioners are also included to prevent
rust and corrosion and BG Universal Cooling System Sealer is also
included to prevent leaks.
OTHER BG FLUID PRODUCTS & SERVICES:
BG Fuel/Air Induction Service
Deposits accumulate on intake valves, injectors, ports, fuel injectors
and combustion chambers causing loss of power, rough idle, hesitation,
misfire, pinging, knocking, mileage and hard starting.
• Clean fuel injectors
• Clean throttle body
• Clean plenum and air-intake
• Clean intake valves and ports
• Remove combustion chamber deposits
• Correct balance of fuel and air in system
• Reduced emissions
• Restored horsepower
• Increased fuel economy
• Starts and idles smooth and runs quieter
BG EGR Service
The Exhaust Gas Recirculation (EGR) valve is clogged causing loss of
power. If neglected a costly repair bill is imminent.
Remove EGR valve and attach a specialized tool at the EGR port, where
a carbon-attacking chemical eliminates carbon build-up.
See EGR Service results:
ports become clogged with heavy carbon, exhaust emissions
increase, engine performance is reduced.
ports are clean, harmful exhaust emissions reduced, engine
performance is improved.
BG Premier Oil Change Service
Problem: Deposits form in the oil and fuel injectors and combustion chambers
Solution: Eliminate the build-up of fuel and oil deposits between oil changes by
• BG MOA®, a premium engine oil additive with deposit inhibitors
• BG CF5™ maintains a clean fuel system by eliminating deposit
Performance Oil Change Service
Problem: High engine temperatures caused by heavy stop and go driving
conditions lead to thermal breakdown of engine oil. Not all of the oil
is removed during a drain and fill oil change. Deposits are left
behind and form sludge and varnish in the engine resulting in smoke
from the exhaust and increased oil usage.
Solution: A BG 9800 tool safely and effectively cleans and removes oxidized
particles and fluid contamination left behind from previous oil
changes. Install new oil and filter along with BG MOA® to fortify new
oil for optimum performance and engine protection. The result will be
improved engine compression, increased power and increased fuel
BG Diesel Injection Service
Deposits accumulate in the entire diesel fuel system,
including the fuel lines, injector pump, fuel injectors and combustion
chambers. This causes rough idle, vibration at idle, loss of power,
decreased mileage, increased smoke, slowed throttle response.
Clean the diesel injection system with a chemical designed to remove
deposits. You’ll experience improved throttle response, fuel
efficiency and reduced emissions.
BG Transmission Service
30,000 miles, transmission fluid begins to show its age as it turns
brown in color and oxidizes due to the combination of time and heat.
Deposits begin to form around the transmission’s many moving parts,
resulting in valves that stick and gears that slip or are sluggish and
chatter as they shift.
than just removing the fluid found in the bottom of the pan, the
entire transmission is cleaned and replenished with the use of special
equipment. The transmission and its torque converter have all of their
old contaminated fluid removed while new fluid and premium
conditioners are added.
One of the hardest working parts of
your vehicle will shift smoothly and effortlessly for many more
BG Drive Line Service
Heat, moisture, extreme pressure and loads cause gear
oil to break down or to be contaminated, leading to lubrication
failure and worn gears.
Remove and replace old worn-out lubricant from manual transmissions,
front and rear differentials, transaxles, and transfer cases. Install
gear oil or the additive package required for vehicle application.
You’ll experience smoother gear-shifting, quieter operation and
extended component-life, which will reduce major repair costs due to
BG Power Steering Service
The power steering pump produces high pressure between 800–2000
pounds, with high heat. This leads to fluid breakdown and failure.
Symptoms include groaning and whining noises, erratic steering and
powerful cleaner suspends and dissolves varnish and gums in the power
steering system and then all of the old fluid is replaced with new
high-tech power steering fluid for both conventional sector and rack
and pinion. The benefit will be a quieter-operating, longer lasting
BG Brake Fluid Service
Brake fluid becomes oxidized and contaminated over time
and use. Heat and moisture cause corrosion on parts and brake fluid
failure. This causes a spongy brake pedal and shows up in discolored
The entire brake system is inspected for leaks, master cylinder
corrosion, worn pneumatic parts, harmful varnish build-up, broken or
rusted bleeder valves, worn rotors and drums and air in the brake
lines. All old brake fluid is replaced with BG Heavy Duty DOT 3 or DOT
4 Brake Fluid. The result will be a longer lasting, more efficient and
safer braking system.
BG Stop Squeal Service
Problem:Brakes that squeal and grind are annoying and need to be
quieted or replaced.
First, a complete inspection is done to determine the condition of the
brake pads, rotors and drums. Worn brake parts are replaced, the
calipers are lubricated and a special treatment is added to the pads
to prevent squealing. This service will give you peace of mind and a
lot less noise every time you stop.
Stop Squeal Process:
Sanding brake pad.
BG Climate Control Service
Condensation in your vehicle’s air conditioning system
promotes fungus, mold and bacterial growth that is blown into the
passenger compartment. Add to this nauseating smell the sound of an
A/C compressor making a clacking sound due to a depletion of oil.
Clean out the air conditioning lines, evaporator and ventilator and
then kill any bacteria mold or fungi. Then, deodorize the entire A/C
system and the vehicle’s interior. Finally, after a complete
inspection for leaks and wear, our technicians will measure and
replenish the oil in the compressor. The air inside your vehicle will
be much cleaner and 4 to 5 degrees cooler, thanks to increased
BG Battery Service
Over time corrosion accumulates on the battery posts
and terminals to the degree that this build-up begins to drain power
from the battery. That’s one of the reasons battery failure is the #1
culprit for calls made requesting roadside assistance.
battery cleaner and leak detector is applied after a thorough cleaning
and inspection. Anti-corrosion BG Battery Terminal Protectors are
installed and the battery posts, terminals and case are sealed.
BG Headlight Restoration Service
Most vehicles built after the early nineties are equipped with acrylic
headlights, which eventually become cloudy from debris that causes
abrasions to the lens. Additionally, exposure to weather, pollutants
and solar radiation can further diminish the appearance of an
otherwise attractive vehicle. But more importantly, it can reduce
visibility during night driving. It's a problem that affects nearly
every vehicle make and model, foreign or domestic.
The BG Headlight Restoration Service removes scratches and
discoloration and restores the lens to original factory brightness…
with a new, long lasting protective layer. As an alternative to lens
replacement, this service is a completely safe, cost effective, and
BG Ethanol Fuel System
Defender Service Problem: Deposits
accumulate on intake valves, injectors, ports, fuel injectors and
combustion chambers causing poor fuel economy, power loss, rough idle,
hard starting, knocking and a plugged fuel filter.
• Clean fuel injectors
• Clean intake valves and ports
• Clean combustion chamber deposits
• Protection from corrosion